Page 17 - ACL Staticide catalogue

STATIC CONTROL FLOORING

4600 STATICIDE ULTRA 4100 STATICIDE RESTORER CLEANER
®
®
Staticide Restorer Cleaner renews gloss and prolongs strip cycles on dissipative floor finishes.
Using a special conductive ingredient, Staticide Restorer cleans while simultaneously breaking
down electrical discharge. This non-abrasive, biodegradable formula does not contain harmful
chemicals like ammonia, phosphates, or alkali. It is tough enough to remove black heel marks, yet
gentle enough to return floors to safe specifications. Made in the USA.

» Coverage: 1000 - 1500 sq. ft. per gallon (approximately)
» Static Dissipative: 10 –10 ohms average @ 100 volts
9
7
» Dilution ratio: 1:10 (1 part cleaner to 10 parts water)
» Solids: 25%
» Low odor
» Suitable for heavy-duty cleaning on Staticide static dissipative floor finishes and dissipative tile

Product #4100-1: Gallon bottle / 4 gallons per case
Product #4100-5: 5-gallon pail
Product #4100-2: 54-gallon drum
#4100

4010 STATICIDE ANTI-STATIC STRIPPER
®
Staticide Anti-Static Stripper provides a completely clean and finish-ready surface by
emulsifying dirt and residual particles of old wax or coating. Effective in hard or soft water, this
biodegradable, low-foaming formula removes multiple coats of wax, synthetic floor finishes, and
embedded dirt without damaging or dulling floors. Made in the USA.

» Coverage: 5000 sq. ft. per gallon (approximately)
» Dilution ratio: 1:4 (1 part stripper to 4 parts water)
» Non-toxic
» Biodegradable (800) 782-8420 (847) 981-9212 www.aclstaticide.com

Product #4010-1: Gallon bottle / 4 gallons per case
Product #4010-5: 5-gallon pail
Product #4010-2: 54-gallon drum
#4010

4800 STATICIDE ULTRA II CONDUCTIVE CHAIR MAT AND FLOOR RUNNERS
®
ACL’s Conductive Chair Mat is made from an engineered PVC with inherent electrical
properties that will last the lifetime of the mat. The homogeneous distribution of carbon black
and proprietary polymers give this conductive thermoplastic vinyl a continuous and permanent
path to ground. Electrical properties are impervious to damage caused by moving furniture, so
the conductive circuit remains unbroken while guarding against scratching and scuff marks.
Made in the USA.
» Resistance measures 10 –10 ohms per ANSI/ESD S7.1-2005
6
3
» Electricals are warranted for the lifetime of the mat
» Compliant to ANSI/ESD S20.20
» Single layer, stippled surface
» .090” (2.29mm) thickness
» Recyclable

Product #6800: 46” x .090” x 50” Black
Product #6836: 36” x .094” x 75’ Black
Product #6848: 48” x .094” x 75’ Black #6800 17