Page 16 - ACL Staticide catalogue

STATIC CONTROL FLOORING

4600 STATICIDE ULTRA
®
No other ESD floor finish can match Staticide Ultra for electrical properties, physical longevity,
and gloss. Staticide Ultra utilizes the latest technology in static dissipative polymers that act on a
molecular level. This enhances its static control ability and effectiveness and maximizes the strip-
ping cycles. Made in the USA.

» Coverage: 1500 - 2000 sq. ft. per gallon (approximately)
» VOC less than 4%
» #4600 Solids : 22% ± 5%
» Provides superior abrasion performance
» Dries faster and with higher gloss intensity than other ESD finishes
» UL listed for slip resistance
» Strip cycle: 12 - 24 months
(800) 782-8420 (847) 981-9212 www.aclstaticide.com
» Suitable to use on vinyl, linoleum, and ceramic tile
» Resistance RTT per ANSI/ESD STM 7.1: 10 –10 ohms average
7
9
#4600 Product #4600-1: Gallon bottle / 4 gallons per case
Product #4600-5: 5-gallon pail
Product #4600-2: 54-gallon drum

4000 STATICIDE ACRYLIC
®
Staticide Acrylic is a high-solids, low-cost method of protecting your sensitive manufacturing
areas from the dangers of static buildup. It is ideal for production areas, warehousing, shipping,
laboratories, and electronic repair facilities. Made in the USA.

» Coverage: 1500 - 2000 sq. ft. per gallon (approximately)
» VOC less than 4%
» #4000 Solids: 20% ± 5%
» Competitively priced
» UL listed for slip resistance
» Strip cycle: 6 - 12 months
» Suitable to use on vinyl, linoleum, and ceramic tile
» Resistance RTT per ANSI/ESD STM 7.1: 10 –10 ohms average
9
8
#4000 Product #4000-1: Gallon bottle / 4 gallons per case
Product #4000-5: 5-gallon pail
Product #4000-2: 54-gallon drum

4800 STATICIDE ULTRA II
®
Advanced acrylic polymer allows superior adhesion and static control for out-of-warranty ESD
floors and other special surfaces. It does not yellow or flake and is tough to scuff. This long-life
floor finish will revitalize shine and electrical properties of old ESD tile. Made in the USA.

» Coverage: 1500 - 2000 sq. ft. per gallon (approximately)
» VOC less than 4%
#4800 Solids: 21% ± 5%
Adheres to ESD tile
» Enhanced abrasion performance
» Strip cycle: 12 - 18 months
» Suitable to use on concrete, epoxy, ESD epoxy, and dissipative tile
» Resistance RTT per ANSI/ESD STM 7.1: 10 –10 ohms average
7
9
Product #4800-1: Gallon bottle / 4 gallons per case
#4800 Product #4800-5: 5-gallon pail
Product #4800-2: 54-gallon drum
16