Page 25 - ACL Staticide catalogue
P. 25
PCB BASICS
8691/8791 MIGHTY MASK
This peelable, fast-curing solder mask is formulated with a special high-temperature resistant
compound for short-term, high-temperature protection up to 510º F. Its superior strength allows
compatibility with most flux systems and cleaning solvents and dries tack-free in thirty minutes.
» Tweezer removal; convenient to use
» Ideal for temperature-sensitive components in hand and wave soldering
» Non-flammable water-based latex
» Made in the USA
Product #8691: 8oz (236ml) squeeze bottle with Yorker spout; 12 bottles per case
Product #8791: Gallon bottle
8660 FREEZE SPRAY ANTI-STAT #8691 / 8791
ACL’s high-performance freeze spray quickly cools off printed circuit boards with pinpoint
accuracy to help identify failed electrical components, such as resistors, capacitors, and relays.
An added anti-stat in the formula prevents corrosion-causing frost and neutralizes static gen-
eration due to friction.
» Excellent for failed component identification
» Anti-static formula will not cause frosting
» Ultra-pure; filtered to 0.20 microns
» Non-flammable
» Made in the USA
Product #8660: 12oz (340g) aerosol can; 12 per case
8699 HEAT SINK GREASE #8660
Heat Sink Grease enables heat transfer away from electronic and electrical components. This
silicone-based material is thickened with a heat conductive metal oxide to maintain a posi-
tive heat sink seal. An effective thermal coupler for any heat sink surface, Staticide Heat Sink
Grease will not separate. The high dialectic strength and low bleed properties make it ideal for (800) 782-8420 (847) 981-9212 www.aclstaticide.com
various applications including engineering and design work.
Packaged in a convenient five-ounce tube, it is a one-component, ready-to-use product that
does not dry out, harden, or melt.
» Temperature range: -60°F (-15°C) to 400°F (200°C)
» Non-corrosive; non-flammable
» RoHS, REACH compliant
» Made in the USA
Product #8699: 5oz (142g) tube; 6 per case
#8699
8697 REFLOW OVEN CLEANER
Reflow Oven Cleaner is a high-performance solution for cleaning reflow ovens, wave soldering
systems, and heat exchanger systems. It removes all types of flux residues, including no-clean,
water-based, and lead-free. Ideal for periodic preventive maintenance, Reflow Oven Cleaner
keeps equipment operating at peak levels. The trigger spray-bottle delivery system is easy to
use and eliminates the need for propellants. It is fully compliant with California VOC require-
ments (CARB), Reach, and RoHS.
» Safe on warm ovens
» Removes baked-on flux
» Non-flammable; non-ozone depleting
» IPA-free
» Made in the USA
Product #8697: 32fl oz (946 ml); 6 quarts per case #8697
25