Page 38 - ITECO Catalogue 2024

FLOORS

DISSIPATIVE FLOOR COATING DETERGENT Low foaming-agent detergent with

highly concentrated ac ve substances

It gives dissipa ve characteris cs to a standard floor, and and alkalinity. It is used for cleaning and maintenance of the
it is excellent in maintaining the conductive floor in waxed surface.

opera ng rooms, clean rooms and data processing centres. Biodegradable: up to over 90% - Dilu on in water 1-5%

It may also be used to maintain the table mat’s dissipa ve It may be used to wash by hand and with a one-brush polisher
surfaces.
or a washing-drying machine.
First treatment: 7805.873 DETERGENT, 5 Kilos unit
-well wash the floor with the stripper -rinse with clean water.

-when dry apply two thin coats on the floor. ELECSTAT-112 Dissipative floor detergent

2
(Yield: 1lt. for approx. 25m per 2 coats)
ELECSTAT-112 is a non-toxic, low foaming, sta c dissipa ve

Ordinary Maintenance: agent for cleaning, used to enhance the features of the exis ng

-sweep the floor with a wet broom, then wash it with the ESD floors or make a non-ESD floor sta c dissipa ve.

detergent diluted in water at 1-5% ra o.
11
Rs: < 10 Ω
Maintenance with spray: Biodegradability: over 90%

-Dilute the coat in water at 30% ra o, spray it on the floor Dlu on in water: 10 to 20%:

and then polish by a one-brush machine, provided with a Applica on: for manual or

suitable scotch-bride. (Yield: 1lt. for approx. 100m ) mechanical cleaning.
2
11
Rs: < 10 Ω
7805.876 LIQUID COAT, 5 Kilos unit
7805.890 Dissipa ve agent ELECSTAT-112

5kg plas c can
STRIPPER (Specific for 7805.876) DISSIPATIVE FLOOR PAINT
Dewaxing alkaline detergent have to be used the first me, A ready to use single pack, dissipa ve water based paint can

before applying the coa ng on the floor. It removes quickly be easily applied by brush or roller. The paint has an a rac ve

mul ple coats of wax and embedded dirt. It is suitable on PVC, sa n finish and is available in mid grey, nearest to RAL7035.

Rubber and Hard floors. Biodegradable up to over 90%.

Two coats are recommended

Dilu on in water 5-10% machine stripping 12-16% manual for best results and should be
stripping Lay off the solu on and let it act for 5 minutes, then applied over a sound, sealed

wash with water. floor, free from dirt, oil or any
loose particles.
7805.870 FLOOR STRIPPER, 5 Kilos unit It is strongly recommended that
the paint is not applied directly
over bare concrete. Where this
occurs the Water Based Primer

7805.856 should be first applied.
7805.854 ELECTROGUARD 40

SINGLE PACK water based sta c dissipa ve acrylic paint, 5

litre unit.
Coverage: 10m /litre per coat (we recommend 2 coats).
2
6
Typical resistance to ground Rg: 10 Ω÷10 Ω
8
7805.856 FLOORPOX PRIMER
Epoxy primer for bare concrete floor

12 litre unit (6 litres base + 6 litres ac vator)
2
Coverage: 16m /litre per coat (we recommend 2 coats)
FLOOR MARKING TAPE
- Self-adhesive
- 75mm wide, 33m long roll
- PVC laminated with clear PP for durability and washability
7807.172 PVC adhesive tape, ESD Protected Area floor marking

38