Page 427 - WERA katalógus

Wera ABC

Rapidaptor
Wera developed the Rapidaptor that allows you to change bits quickly with just one hand and without
extra tools.
Rapid-in and self-lock
The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as
soon as the bit is applied to the screw. Bits are held securely and wobble-free.
Rapid-out
Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and
unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the
smallest bits without extra tools.
Rapid-spin
The free-spinning outer sleeve stabilises battery or mains-powered tools during the screwdriving process.
This makes it easier to apply the tool to the screw and prevents slipping.
Chuck-all
The Rapidaptor quick-release chucks hold ¼" DIN 3126-C 6,3 and E 6,3 as well as Wera series 1 and 4
bits.
Single-hand function
Every function of the Rapidaptor quick-release chuck, such as inserting or releasing bits, can be carried
out with one hand. This is faster, more economical and more ergonomic. There are no unnecessary
manoeuvres.

Rapidaptor with ring magnet
The floating, free-spinning magnetic sleeve holds even large and heavy screws very securely for fast
application, eliminating the need to hold the screw, which can be dangerous and painful. Perfect for
overhead work.

SPKL L-keys
L-keys with a green rubber sleeve (SPKL) are made from easy-to-grip round bars. The sleeve ensures
comfortable and safe working even at low temperatures. High corrosion protection.

Stainless Steel Tools
Wera Stainless tools are made from 100 % stainless steel. Their wear debris consists of rustproof stainless
steel particles, which prevents unsightly extraneous rust. Wera stainless steel tools are vacuum ice-hardened
to give them the necessary hardness and rigidity for industrial applications.
Titanium nitride coated bits
Industrial applications are subject to permanent stresses that place high demands on the durability of the
tool. Bits for these applications are coated with extremely hard titanium nitride. This abrasion-proof coating
provides the necessary hardness that is required on a mass production line.

®
TORQ-SET Mplus
®
Wera developed the Mplus profile with stronger flanks compared with tools with a conventional TORQ-SET
profile. This results in approximately 70 % extra torsional strength and greatly extends the service life of
Wera Mplus tools.

423