Page 425 - WERA katalógus

Wera ABC

Chiseldriver
The chiseldriver is the solution for jobs that require more than just screwdriving. For fastening, chiselling
and loosening seized screws or hose clamps. With an integrated impact cap that extends service live and
reduces the risk of splintering. With a pound-thru hexagon blade made from high-grade material for
zero-loss transfer of high forces when struck with a hammer. The tough viscous tempered material
prevents the blade from splintering or breaking. More TORQUE can be transferred by attaching an
open-jawed or ring spanner to the integrated hexagon bolster.

Diamond coated bits
The minute diamond particles on the tip of the bit literally bite into the screw. The secure hold means that
less contact pressure is required, which reduces the risk of slipping. To find diamond coated bits in the
catalogue look for the letters DC after the article number.

Extra hard bits
Ideal for soft screwdriving e.g. in wood. TORQUE increases continuously without any peaks during fastening
until the head of the screw reaches the surface of the material. Extra hard bits are made from a special
material that extends the tools’ service life and reduces the risk of material breakage. To find these bits in
the catalogue look for the letter H after the article number.

Flexible Lock System
All rigid Zyklop extensions are fitted with a freewheel sleeve which lets you tighten and loosen screws and
bolts quickly and effectively. The premium extensions are also fitted with the flexible lock system. With this
system activated, drive handles can be attached permanently to the extension, preventing slipping or
accidental loss of the tool. When the system is deactivated the sockets can be attached as usual and
changed in a flash.

Gold Tip
Some Kraftform Plus screwdrivers can do more than other similar products. The Lasertip prevents the
®
screwdriver from slipping out of the screw and the holding function of TORX screwdrivers holds the screw
on the screwdriver like a third hand. These Wera Kraftform Plus screwdrivers have a gold tip so you can
spot them in your tool bag straight away.
Green Label
When used with power tools bits and holder are subject to heavy wear caused by peak loads. Wera
BiTorsion tools have special tempered torsion zones that absorb these peak loads. In BiTorsion bits this
torsion zone has a lower hardness than the tip of the shaft. This prevents premature breakages and
significantly extends the service life of the tool. Wera BiTorsion bits are easily identified by the letter B
in the article number and the green label.
Hex-Plus Profile
The problem with hexagon socket screws is the easily "rounded" screw recess. This is caused by the
sharp edges of the tool pressing against the inside of the screw profile. Gradual wear eventually grinds
and destroys the head of the screw. Wera’s Hex-Plus tools provide more contact surface inside the screw
profile, which reduces the notching effect and ultimately the deformation of the screw. Hex-Plus tools can
also transfer up to 20 % more TORQUE.

Impact bits
Impact bits are designed for use in powerful impact screwdrivers.
Impact bits were specifically developed to withstand high power tool forces.

421