Page 74 - WERA katalógus

Accessories

Indispensable aids for screwdrivers.

1440/1442 Screw gripper set

And this is how the gripper works:

Push the screw gripper onto the tip
of the screwdriver until the end of the
blade protrudes from the rubber blade
holder.
Application: Attachment with holding function for screws, holds all screw
profi les and sizes securely on the tool, suitable for round and
hexagon blades with a diameter from 4.5 mm to 6.0 mm and
6.5 mm to 8.0 mm
Attach the screw to the tip of the
blade and secure it in the screw Construction: Elastomer
gripper.

Code
05073680001 1440 1 x 4,5-6,0 1
1442 1 x 6,5-8,0
Pull the screw gripper towards the
screwdriver handle until the two 1441 Screw gripper attachment for screwdriver blades,
arms of the gripper sit against the long bits and L-keys with holding function for screws
head of the screw and are spread
slightly apart. The Wera screw gripper
releases the screw automatically after
it has been fastened.

The two gripper arms spread further Application: Attachment with holding function for screws, holds all screw
apart as they are pushed against the profi les and sizes securely on the tool, suitable for round and
surface and automatically snap hexagon blades with a diameter from 4.5 mm to 6.0 mm
back when the head of the screw is Design: Elastomer
countersunk.

Code
When fastening screws in blind holes 05073681001 1441 1 x 4,5-6,0 1
the screw gripper is pushed back,
making it possible to reach even
deep-seated screws.

70