Page 2 - 3M ESD termékek katalógus
P. 2
3M Static Control
™
Product Selection Guides
3M Static Shielding Bags 3M Table and Floor Mats Wrist Strap Monitor
™
™
3M Product Selection Guides Product Selection Guide 1. 8800 Product Selection Guide 3. 6800 4. 8200 5. TM-L3 See product descriptions 3M offers single and dual wire workstation monitors that reliably test operator’s resistance/voltage, work surface ground
Product Selection Guide
™
on the first page.
2. UltraR2
3M is one of the leading manufacturers of static shielding bags, offering fast shipment from large inventories of standard
sized bags and custom bag sizes to fit your application. Open top, Ziptop and Tapetop closures are available. Bags are connections and tool ground connections. Our monitors provide customers the ability to confirm that their S20.20 program
and protective products are working. The following provides you with the necessary information to recommend and sell the
allow you to quickly choose the available. Static shielding bags are intended to protect electronic items from electrostatic damage during manufacture, appropriate wrist strap monitors to your customers. 3M Workstation Monitor, 724 3M Dual Conductor Portable
marked with ESD caution information, RoHS compliant symbols, and are lot coded for traceability. Custom printing is
transportation, and storage by attenuating ESD (electrostatic discharge).
™
™
3M Continuous Monitor, Single Wire
™
3M Metal-in Static Shielding Bag 3M Puncture Resistant Metal-In 3M Metal-Out Static Shielding Bag 6. TM-L1 7. 1864 8. CONDMAT 9. 9900 10. AFM Single Wire Monitors continuously Dual-wire monitors continuously Wrist Strap Monitor, 725
™
Portable Dual-wire
™
™
Static Shielding Bag SCC 1300
measure an operator’s resistance
SCC 1000, Open Top and Ziptop
test the connection integrity of the
static control product to fit your Metal-in Shield Bags have a stronger plastic layer Metal-out Shield Bags ground loop
monitors for Static protection
SCC 1500, Open Top and Ziptop
Puncture Resistance
Metal-in Shield Bags
are intended to provide
are intended to provide a
static safe environment for
better static control than
electronic devices.
to help reduce punctures.
metal-in bags.
application. Ask your Authorized 3M Features Features Features for charge decay and less charge retention than 11. 8507 12. 8505 13. 8501 14. FSKL3RD 15. 8011 Features Features Features
• More than 70 sizes of open top bags ready to ship
• Continuously monitors the resistance of up to
• Most cost effective means for continuously
• Portable static protection in a compact, battery-
• Metal layer is positioned near the outer surface
• A stronger polyester plastic layer helps to prevent
operated unit.
monitoring operator connection to ground.
two operators and up to two work surface ground
same day.
sharp tubes and cards from puncturing the bag.
• Monitor work’s wrist strap and ground wire connection.
• WSMONITOR1: one wrist strap/person
• Metal-in, four-layer construction.
connections
metal-in bags.
• More than 30 sizes of Ziptop bags ready to ship
same day.
35M ohms
environment for electronic devices.
• WSMONITOR3: two wrist strap and the mat
• More than 25 sizes ready for same day
• Faraday effect static shielding. • This bag is intended to provide a static safe • Proprietary top coating for durability. • WSMONITOR2: one wrist strap and the mat • Alarm sounds when resistance exceeds 10 or • Use in manufacturing and field service environment.
shipment.
• Four-layer construction.
Distributor or 3M salesperson for 3M Metal-In Static Shielding Bag 3M Puncture Resistant Metal-Out 3M Metal-Out Cushioned Static 3M Ironman Workstation Monitor, 3M Wrist Strap and Ground 3M WS Aware Dual Workstation
™
™
™
Monitor 773
CTC331
Monitor
™
™
™
1900 and 3M™ Metal-in Static
of Workstation
Overstress
and Ground
Monitor
Shielding Bag 1910 Static Shielding Bag 2100R and 3M ™ Shielding Bag 2120R Electric Wrist Strap Total solution
ZipTop Recloseable Static Shielding
Monitor
monitor on
Bag 2110R See 3M static control products, data sheets, and more at 3Mstatic.com operator
and Board
3M Product Selection Guides today. Metal-in Shield Bags Metal-out Shield Bags Cushioned Static In the event any product is proven not to conform with 3M’s Regulatory Information, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated
Puncture Resistance
Shielding Bags
are intended to provide a
help protect devices
below.
static safe environment for
have a stronger plastic layer
to help reduce punctures,
from physical damage
electronic devices.
**Lead-free means that the product has less than 2 ppm of lead when tested by ICP-AES, with reference to EPA method 3051A/3052.
and are intended to
• Ability to monitor two workstation
• Audio and visual alarm
• An audio and visual alarm is produced in the event
Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use.
of an electrical overstress.(EOS)
provide better static and provide static shielding. Important Notice Features Features Features
control than metal-in • Wrist strap and body voltage monitor. • Monitor two operator‘s body voltage and • Monitor both resistance and voltage on operator,
alarm if operator voltage exceeds 2.5 V and
connectivity, alarm if operator voltage exceeds
Warranty; Limited Remedy; Limited Liability. • Dissipative or conductive mat is monitored for +/-5V and resistance is above 10 M ohms. resistance is above 10 Meg-Ohm.
Features Features Features 3M’s product warranty is stated in its Product Literature available upon request. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED its connectivity
• The original 3M metal-in shielding bag. • A stronger polyester plastic layer helps to prevent • Open cell cushion to help protect product. TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty • Monitor overvoltage directly on circuit board • Monitor two ground impedance of metal ground • Alarm if ESD mat resistance to ground exceeds 10 9
• Monitor EMI on metal ground
connection
• More than 30 sizes. sharp tubes and cards from puncturing the bag. • Metal-out shielding bag: Metal layer is period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where during assembly.
• Two week lead time. • Metal layer is positioned near the outer surface for positioned near the outer surface for charge
charge decay and less charge retention than metal- decay and less charge retention than metal-in prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory
in bags. bags.
asserted.
3
Electronic Solutions Division
Static Control Products
926 JR Industrial Drive
Sanford, NC 27332-9733
Toll-Free: 866-722-3736
International: 919-718-0000 Please recycle. Printed in USA.
Email: 3mstaticinfo@mmm.com © 3M 2013. All rights reserved.
www.3Mstatic.com 98-0799-1104-0 JHA
3M Static Shielding Bags 3M Static Mats 3M Wrist Strap Monitors
™
™
™
™
3M Conductive Bags, 3M Film and 3M Moisture Barrier Bags 3M Wrist Straps ESD Event Monitor
™
™
™
3M Containers
™
Product Selection Guide Product Selection Guide Product Selection Guide Product Selection Guide
3M Conductive Bags, 3M Film and 3M Containers are easy-to-ground packages designed for handling, shipping and 3M is one of the leading manufacturers of moisture barrier bags, offering short lead times for custom bag sizes to fit your Wrist straps are the primary method for grounding people handling static sensitive electronic items. 3M offers single The EM Aware TNG ESD Event Monitor detects and measures ESD events as well as static voltage and ionization parameters
storage. These products are made of opaque, volume-conductive carbon or carbon fiber impregnated polyolefin plastics. application. 3M Moisture Barrier Bags are marked with moisture and ESD caution information, RoHS-compliant symbols, conductor wrist straps that work with impedance type constant monitors and wrist strap checkers, and dual conductor depending on the model. The EM Aware TNG Monitor is a comprehensive diagnostics and troubleshooting tool for use in an
and are lot-coded for traceability. Custom printing is available. Moisture barrier bags are intended to protect electronic wrist straps that work with resistance type continuous monitors. See the 3M™ Monitor/Wrist Strap Selector on the last ESD environment. It provides monitoring of critical ESD processes and is an instrument that can qualify tools for handling ESD
sensitive devices. It is an essential ESD management tool.
3M Conductive Bag 2004 and 3M™ 3M Conductive Film 1700 3M Conductive Tubing 1724 items from moisture and electrostatic damage during manufacture, transportation, and storage. page. 3M Premium, Standard, and Value performance products are designed to better fit your application. 3M EM EYE Meter 3M EM Aware TNG Event Monitor 3M EM Aware TNG Event Monitor
™
™
™
™
™
™
Conductive Bag 2014 3M Single Conductor Wrist Straps Starter Kit
™
Conductive bags Conductive film Conductive tubing ™ ™ ™
™
™
are intended to provide an is intended to provide an is intended to provide an 3M Moisture Barrier Bag 3M Moisture Barrier Bag 3M Moisture Barrier Bag 3M Wrist Strap AMWS61M 3M Wrist Strap with Metal 3M Wrist Strap 2214 Portable ESD Event ESD Events Static Voltage Monitor Monitor Starter Kit
™
Detection Meter
Dri-Shield 2700
Dri-Shield 3000
Dri-Shield 2000
easy-to-ground package for easy-to-ground packaging easy-to-ground packaging
static sensitive applications material for handling, material for handling, Aluminized Moisture Puncture Resistant High Barrier Foil Premium Premium Premium
shipping and storage. shipping and storage. Barrier Bags Aluminized Moisture Moisture Barrier Bags performance performance performance Features
are intended to provide a Barrier Bags are intended to provide a dry single wire wrist strap with single wire wrist strap with single wire wrist strap.
static-safe and dry environment have a stronger plastic layer environment for electronic adjustable metal band. fixed size metal band. • Easy to operate with touch pad
• Detects electrostatic discharge
for electronic devices. to help reduce punctures. devices that will be re-flow (ESD) events.
soldered.
• Measures the magnitude of
HBM, MM or CDM
Features Features Features Features Features Features Features Features Features ESD events and characterizing Features Real-time ESD Monitoring System
Features
• Bags are heat-sealable. • Film is heat-sealable. • Used to make bags and sleeves for custom • Counter ESD Event
• Ten sizes of bags. • Roll widths in 36, 54, and 72 inches. • Tubing is heat-sealable. • Multiple layers of metalized polyester provides • A stronger polyester plastic layer helps to prevent • Foil layer provides higher barrier than aluminized • Blue adjustable flex-metal wristband. • 3 sizes of flex-metal wristbands: Small: Model • Red adjustable fabric wristband. • Data logging feature • Monitors ESD event, Static-field voltage, Ion • Portable
packaging requirements.
sharp trays from puncturing the bag.
• 1/8 inch (4mm) snap.
balance and Decay
bags.
• 1/8 inch (4mm) snap.
2205, Medium: Model 2206, Large: Model 2207.
• Connect several EM Aware TNG units to your
moisture barrier for this economical bag.
• Large bag sizes fit cans and drums. • More than 20 sizes ready to ship same day. Fast • Six-layer construction. • Intended for dry packaging of SMDs on trays and • 1/8 inch (4mm) snap. • Capable of rejecting non-ESD
• Tubing widths are 5 and 12 inches shipping of custom sizes too. • This bag is intended to provide a static-safe and dry reels. • 6 foot coiled cord with a 1 megohm resistor. 12 ft • Compatible with the Wrist Strap Ground Cords • 5 foot coiled cord with a 1 megohm resistor. event • Adjustable sensibility and individual computer for ESD/EMI environment data
collection
10 ft cord also available.
cord also available.
alarm setting
• Faraday effect static shielding. environment for electronic devices. • This bag is intended to provide a static-safe and • Strong cord strain reliefs for long life. Models 2210, 2220, 4610 and 4611. • Strong cord strain reliefs for long life. Application • Communication interface to a PC and Data • Maximum six EM Aware TNG units equipped
with Starter Kit.
dry environment for electronic devices.
• Six-layer construction. logging and Monitoring software
™
™
3M Single Card Carriers 8500 3M Single Device Carrier 5701 3M Hinged and Round Containers • ESD event detection • Provide factory management level monitoring • Window-based software
™
• ESD audit and survey
by connecting several EM Aware TNG units
• ESD diagnostic Application
Conductive Card Conductive Device Conductive 3M Moisture Barrier Bag 3M Moisture Barrier Bag 3M Wrist Strap WBB-AFWS61M 3M Wrist Strap BLUEWS61M 3M Wrist Strap 2272 Application • ESD Audit
™
™
™
• Most popular for troubleshooting and diagnostic
Carriers
Carriers
Containers
™
™
• Continuous monitoring for ESD environment
are intended to provide are intended to provide are intended to provide Dri-Shield 3400 Dri-Shield 3700 applications
static-safe storage,
static-safe storage,
static-safe storage,
Premium
Standard
transport, and handling of transport, and handling of transport, and handling of High Barrier Foil Puncture Resistant performance performance performance Value
High Barrier Foil
Moisture Barrier
electronic parts. Bags Moisture Barrier Bags single wire wrist strap. single wire wrist strap. single wire wrist 3M and Dual Lock are trademarks of 3M Company. All other trademarks are owned by their respective companies.
electronic parts.
electronic parts.
are intended to provide a dry have a stronger plastic layer strap. * RoHS 2011/65/EU Compliant means that the product or part does not contain any of the substances in excess of the maximum concentration values (“MCVs”) in EU RoHS Directive 2011/65/EU. The MCVs
are by weight in homogeneous materials. This information represents 3M’s knowledge and belief, which may be based in whole or in part on information provided by third party suppliers to 3M.
**Lead-free means that the product has less than 2 ppm of lead when tested by ICP-AES, with reference to EPA method 3051A/3052.
devices that will be re-flow
are intended for SMDs that
Features Features Features environment for electronic to help reduce punctures and In the event any product is proven not to conform with 3M’s Regulatory Information, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
• Helps to protect individual printed circuit boards • Helps to protect individual devices from static and • These containers are made from an easy-to- soldered. are to be re-flow soldered. Important Notice
physical damage.
ground plastic material.
from static and physical damage.
• Interior is lined with dissipative foam. • “Saddle” design supports device leads and helps • Hinged containers are one piece and snap shut. Features Features Features Features Features Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use.
• Four sizes available. prevent accidental bending. Five sizes. • This economical bag is intended for dry packaging • A stronger polyester plastic layer helps to prevent • Blue adjustable fabric wristband. • Blue or maroon adjustable fabric wristband. • Blue adjustable fabric wristband. Warranty; Limited Remedy; Limited Liability.
• Carrier accepts up to 18-pin 300 mil and 400 mil • Round containers have a removable lid. Five sizes. of SMDs on trays and reels. sharp trays from puncturing the bag. • 1/8 inch (4mm) snap. • 1/8 inch (4mm) snap. • 1/8 inch (4mm) snap.
devices, and up to 28-pin 600 mil devices. • Foil layer provides higher barrier than aluminized • Foil layer provides higher barrier than aluminized 3M’s product warranty is stated in its Product Literature available upon request. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED
period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where
. bags. bags. • 6 foot coiled cord with a 1 megohm resistor. • 6 foot coiled cord with a 1 megohm resistor. • 5 foot coiled cord with a 1 megohm resistor. TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty
12 ft cord also available.
12 ft cord also available.
12 ft cord also available.
• This bag is intended to provide a static-safe and dry • Intended for dry packaging of SMDs on trays and • Strong cord strain reliefs for long life.
environment for electronic devices. reels. prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory
asserted.
3
Electronic Solutions Division
Static Control Products
926 JR Industrial Drive
Sanford, NC 27332-9733
Toll-Free: 866-722-3736
International: 919-718-0000 Please recycle. Printed in USA.
Email: 3mstaticinfo@mmm.com © 3M 2013. All rights reserved.
www.3Mstatic.com 98-0799-1108-1 JHA
3M Conductive Packaging 3M Moisture Barrier Bags 3M Wrist Straps 3M ESD Event Monitors
™
™
™
™
™
3M Electronics Vacuum 3M Humidity Indicator Cards 3M Heel Grounders 3M Ground Monitor
™
™
™
and 3M Filters and 3M Desiccant
™
™
Product Selection Guide Product Selection Guide Product Selection Guide See product descriptions Product Selection Guide
on the first page.
Proper grounding is crucial for the safe and uninterrupted operation of equipment. In critical environments, a faulty ground connection may result
™
3M Electronic Vacuum Accessories 3M Humidity Indicator Cards (HICs) are printed with moisture sensitive spots which respond to various levels of humidity with 1. SG1M- size 2. FG1M- size 3. NS-HGC1M 4. 2051 5. HGC1M in personnel exposure to dangerous voltage, equipment lockups or malfunctions, and damage to sensitive components. Proper grounding has nd
Image Part No. Description Image Part No. Description a visible color change from blue to pink. HICs are used inside vacuum sealed (dry-packed) moisture barrier bags to monitor tool management. 3M ground monitoring products offers a suite of features designed to verify or monitor the ground impedance.
™
™
™
SV- High Performance Filter, Type 2 filter for SV-PCR3 Power Receptacle the interior humidity level. When the bag is opened, the card can be examined to verify proper dryness inside the bag. 3M Ground Pro Ground 3M Ground Man CTC333 3M Ground Man Plus CTC334
Integrity Meter
Replacement with Filter. 120v
medium-sized particles. Specifically
SPF2 designed for collecting unwanted toner direct replacement for use Desiccant works by absorbing airborne moisture remaining inside a bag after vacuum sealing, and helps to capture moisture Designed to verify Continuously Continuously
from copiers and laser printers. with model 497AJM. that passes through the bag material. 3M Desiccant is packed inside white non-woven plastic or brown kraft paper pouches, critical grounding ground monitor ground monitor
and is shipped in sealed pails or drums. 6. HGC1M-C parameters in up to three up to three
on tool
on tool and an
SV-SPF1 Fine Particle Filter, Type 1. This filter SV-CN1 Crevice Nozzle 7. 2053 8. BLUE-HGC1MD 9. HGC1M-N72-BLU 10. HGC1M-ORG any facility connection point connection point
™
has a more concentrated weave for 3M Humidity Indicator Card 3M Humidity Indicator Card 3M Humidity Indicator Card 3HIC125
™
™
collecting extremely fine particles. 51060HIC125 51015HIC125 operator
Features Features Features
3 Spot HICs 3 Spot HICs 3 Spot HICs • Measures ground impedance. Range • Monitors ground impedance and adjustable • Dual wrist strap is monitored for its connectivity for
SV-CS1 Carrying Strap Assembly SV-CB1 Crevice Brush are intended to provide are intended to provide are intended to provide from 0.001 ohm to 1999 ohm. threshold alarm from 1-20ohms. person voltage and resistance
indication of humidity inside a indication of humidity inside indication of humidity • Accurate auto-zero for test leads. • Output connector provides 1(+5v)/0(0v) Logic • Monitor operator’s body voltage.
signal out to host tool.
• Output signal is for process tool and wrist strap
barrier bag containing SMDs a barrier bag containing inside bags, equipment, • Measure high frequency noise (EMI) in ground tools. monitoring.
on trays or reels. SMDs on trays or reels. and containers. 11. HGS1MD-RED 12. HGS1M 13. TG1M 14. 2044 15. HGC1M-ECG • AC and DC voltage measurement • Output signal is for process tool monitoring • Includes all feature of 3M Ground Man
• Enabling and disabling audible alarm
• Audio alarm
SV-SH32 Vacuum Hose Assembly. This 32 SV-WA2 Curved Wand Nozzle
in. (81.3 cm) hose stretches to
approximately ™
10 feet (3.0 m) 3M Ground Master Equipment Ground Monitor
Features Features Features
SV-LRP Long Red Filter Plug. This plug is used SV-NN Needle Nose Nozzle • Indicates 5%, 10% and 60% RH. • Indicates 5%, 10% and 15% RH. • Indicates 30%, 40% and 50% RH. • Monitors proper ground connections of up to eight tools and • Output to data acquisition or facility monitoring system
(Ground Master-3 and 5, refer to below products description)
up to 16 tools in tandem with Ground Master-3.
to cover the filter inlet for storage when • Card size is 2 x 3 inches. • Card size is 2 x 3 inches. • Card size is 2 x 3 inches. 16. HGC1M-EC 17. 5402
the vacuum cleaner is not in use. Warning: • Monitor ground impedance and adjustable threshold alarm • Logic signal output to the tool shuts down if ground fails
• Packed 125 cards inside a metal can. • Packed 125 cards inside a metal can. • Packed 125 cards inside a metal can. from 1-20ohms (Ground Master-RT)
• Card can be attached with string or tie through
™
the punch-out holes. The 3M Heel Grounding Assemblies are not to be used in • EMI monitor on each ground
SV-SRP Short Red Filter Plug. This plug is used SV-DBSD1 Dusting Brush areas where the individual may come in contact with exposed Ground Ground Ground
to cover the filter inlet for disposal. electrical circuitry exceeding 250 Volts AC. Master-3 Master-5 Master-RT
3M Humidity Indicator Card 4HIC100 3M Humidity Indicator Card 6HIC200 3M Desiccant
™
™
™
4 Spot HICs 6 Spot HICs Desiccant Pouches
See 3M static control products, data sheets, and more at 3Mstatic.com indication of humidity inside indication of humidity over dry inside a moisture See 3M static control products, data sheets, and more at 3Mstatic.com • Outputs interface is: 4..20mA • Outputs interface is MODBUS • Interface is relay contact and logic output for
are intended to provide
are intended to provide
help to keep product
• Networkable with Static Management
• Can be connected together in order to monitor up
3M and Dual Lock are trademarks of 3M Company. All other trademarks are owned by their respective companies. 3M is a trademark of 3M Company. tools and power can be supplied via separate
* RoHS 2011/65/EU Compliant means that the product or part does not contain any of the substances in excess of the maximum concentration values (“MCVs”) in EU RoHS Directive 2011/65/EU. The MCVs a barrier bag containing the widest range for multiple barrier bag. to 16 grounds. The slave Ground Master unit gets Program (SMP) terminals.
are by weight in homogeneous materials. This information represents 3M’s knowledge and belief, which may be based in whole or in part on information provided by third party suppliers to 3M. SMDs on trays or reels. applications. In the event any product is proven not to conform with 3M’s Regulatory Information, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. its power from the master unit
In the event any product is proven not to conform with 3M’s Regulatory Information, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
**Lead-free means that the product has less than 2 ppm of lead when tested by ICP-AES, with reference to EPA method 3051A/3052. Features Features Features Important Notice 3M and Dual Lock are trademarks of 3M Company. All other trademarks are owned by their Important Notice
Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use.
Important Notice • Indicates 10%, 20%, 30% and 40% RH. • Indicates 10%, 20%, 30%,40%, • Clay desiccant packaged respective companies. Before using this product, you must evaluate it and determine if it is suitable for your intended application.
Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. 50, 60% RH. inside plastic or paper * RoHS 2011/65/EU Compliant means that the product or part does not contain any of the You assume all risks and liability associated with such use.
• Card size is 3 x 2 inches. Warranty; Limited Remedy; Limited Liability. substances in excess of the maximum concentration values (“MCVs”) in EU RoHS Directive
pouches.
3M’s knowledge and belief, which may be based in whole or in part on information provided
3M’s product warranty is stated in its Product Literature available upon request. 3M MAKES
Warranty; Limited Remedy; Limited Liability. • Packed 100 cards inside a metal can. • Card size is 1.56 x 4.75 inches. • Eight pouch sizes: 1/6, 1/3, 3M’s product warranty is stated in its Product Literature available upon request. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED 2011/65/EU. The MCVs are by weight in homogeneous materials. This information represents Warranty; Limited Remedy; Limited Liability.
by third party suppliers to 3M.
3M’s product warranty is stated in its Product Literature available upon request. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED • Color comparison bar shows the correct color to • Packed 200 cards inside a metal ½, 1, 2, 4, 8, and 16 Units. TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty In the event any product is proven not to conform with 3M’s Regulatory Information, th
can.
read the spots.
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where
TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty • Pouches are kept dry inside liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. If this product is defective within the warranty period stated above, your exclusive remedy shall be,
period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where pails or drums. prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory **Lead-free means that the product has less than 2 ppm of lead when tested by ICP-AES, with at 3M’s option, to replace
Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or
asserted.
prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory reference to EPA method 3051A/3052.
asserted. consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.
3 3 3
Electronic Solutions Division Electronic Solutions Division Electronic Solutions Division
Static Control Products Static Control Products Static Control Products
926 JR Industrial Drive 926 JR Industrial Drive 926 JR Industrial Drive
Sanford, NC 27332-9733 Sanford, NC 27332-9733 Sanford, NC 27332-9733
Toll-Free: 866-722-3736 Toll-Free: 866-722-3736 Toll-Free: 866-722-3736
International: 919-718-0000 Please recycle. Printed in USA. International: 919-718-0000 Please recycle. Printed in USA. International: 919-718-0000
Email: 3mstaticinfo@mmm.com © 3M 2013. All rights reserved. Email: 3mstaticinfo@mmm.com © 3M 2013. All rights reserved. Email: 3mstaticinfo@mmm.com Please recycle. Printed in USA.
www.3Mstatic.com 98-0799-1101-6 JHA www.3Mstatic.com 98-0799-1100-8 JHA www.3Mstatic.com © 3M 2013. All rights reserved.
98-0799-1109-9 JHA
3M Electronics 3M HICs and Desiccant 3M Heel Grounders 3M Ground Monitors
™
™
™
™
Vacuum and 3M Filters
™
3M is a trademark of 3M Company.
* RoHS 2011/65/EU Compliant means that the product or part does not contain any of the substances in excess of the maximum concentration values (“MCVs”) in EU RoHS Directive 2011/65/EU. The MCVs
are by weight in homogeneous materials. This information represents 3M’s knowledge and belief, which may be based in whole or in part on information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Important Notice
Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use.
Warranty; Limited Remedy; Limited Liability.
3M’s product warranty is stated in its Product Literature available upon request. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED
TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty
period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where
prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory
asserted.
3
Electronic Solutions Division
Static Control Products
926 JR Industrial Drive
Sanford, NC 27332-9733
Toll-Free: 866-722-3736
International: 919-718-0000 Please recycle. Printed in USA.
Email: 3mstaticinfo@mmm.com © 3M 2013. All rights reserved.
www.3Mstatic.com 98-0799-1106-5 JHA